Description
Equipment Description:
1.Multiple screws can be fastened automatically at once on the turntable, replace multiple labours’ work; for instance, the four-stations automatic screwing machine has four sets of fixtures which are used for screwing, and able to work on multiple products at the same time. The number of axes / screwdriver can be customized according to customer requirements.
2.. The number of axes can be customized according to customer requirements.
3.The machine is the most cost-effective and usually recovers costs quickly.
4.Manually picking and placing the product, the machine automatically fasten the screw and can determine whether the screw is tightened. If there is a poorly screwed product, the machine will give an alarm prompt to facilitate the distinction between defective products.
5.The electric screwdriver transfer the torque to fasten the screw via directional drive shaft. The positioning to the screw hole is easy to adjust, and it is easy to change the product variety.
6.Good versatility. A certain electric screwdriver can be removed.
7.Compared with traditional vibrating plate or lifting type feeding system, this machine utilize turbine type feeding with no jam issue. Smaller in size and noise, and easier to maintain.
8.The machine is simple and practical, operator is able to quickly master operations and commissioning.
Technical Specification:
- Dimensions (length * width * height): Custom made.
- Working voltage: 220V/50Hz.
- Working pressure: greater than 0.5Mpa.
- Electric screwdriver with adjustable torque from 0.2-1.2N.m, and the rotation speed is greater than 1000r/min.
- Machine efficiency is about ~4S to complete a product
- Screw supply speed ≥ 60pcs / min.
- Equip with detection and automatic alarm in the event of missing screw, stripped screw and under-tightened screw.
- Equipment weight: ~200kg.
